The ATEME CM4101 encoder is the world's first encoder to simultaneously support H.264, 4:2:2, and 10-bit encoding. This encoder provides broadcast industry users with an unprecedented high-quality video encoding solution. When broadcast users seek the highest standards and quality in encoding performance, the CM4101 encoder is undoubtedly the best choice.
Video Parameters
Video Compression
SD/HD MPEG-4 AVC/H.264 10-bit or 8-bit –
Main, High, and High 4:2:2 Profile up to Level 4.1
SD/HD MPEG-2422P@ML/HL
AVC – I-frame only mode up to 150Mbps
Optional Accessories (Software License):
- HD Options
- 4:2:2 8-bit
- 4:2:2 10-bit
Video Format
HD: 1080i, 720p, and 1080psf
Standard Definition: 576i and 480i
Input format detection and auto configuration mode
Encoding Rate
Standard Definition: 0.5 to 30 Mbps,
HD: 1 to 80Mbps
Accuracy
1080i x 1920, 1536, 1440, 1280, and 960 pixels
720p x 1280, 1024, 960, and 640 pixels
576i x 720, 576, 544, 480, and 352 pixels
480i x 720, 640, 576, 544, 480, and 352 pixels
Frame rates
1080i @ 25, 29.97, 30 Hz
1080p at 23.97, 24, 25 Hz
720p at 50, 59.94, and 60 Hz
576i @ 25 Hz, 480i @ 29.97 and 30 Hz
Video Processing
Noise Reduction filter
Fixed or adaptive configuration
Automatic I frame insertion
Automatic scene cut detection
Multi-pass look-ahead CBR and Capped VBR
Linear and nonlinear spatial filtering*
Inverse telecine (3:2 pull-down)
Logo insertion
Auxiliary Data and Signals
Closed captioning compliant with EIA-608, EIA-708,
SMPTE 334 and standard ATSC.
DVB Teletext/CEEFAX
Vchip parental control
VITC Time Code
Wide Screen Signaling (WSS)
Active Format Description (AFD)
Digital Program Insertion (DPI)
SCTE35 insertion via SCTE104 triggers or GPIO*
Compliant with standards: MPEG-2 TS / DVB / ATSC / ISDB
Audio ParametersAUDIO SPECIFICATIONS
Number of Channels
Standard configuration of 8 stereo pairs Native Encoding up to 8 stereo pairs,
Supports 5.1 audio service
Compressed format
MPEG-1 Layer II
MPEG-2/MPEG-4 AAC-LC
HEV1-AAC, HEV2-AAC (optional)
Dolby Digital E, DD, DD+ (AC3/AC3+) pass-through.
Dolby Digital Options*:
Dolby Digital E decode to AAC LC, AAC HEv1 or Dolby Dolby Digital (AC3) / Dolby Digital Plus (AC3+) Encode
Sampling frequency: 32, 44.1, 48 KHz
Output transmission layer parameters
MPEG-2 transport stream over UDP/ Unicast / multicast streaming
MPEG-2 transport stream over DVB-ASI
Simultaneous support for ASI and IP transport stream output
Optional components:
- FEC Pro MPEG CoP3r2 (SMPTE2022)
- BISS 0/1/E Encryption.
Input/Output Interface
Video Input
HD-SDI (SMPTE292M)
SD-SDI (SMPTE 259M-C)
3G-SDI (SMPTE-424M)*
Audio Input:
Embed SD-SDI
(Up to 8 pairs of stereo embedded SDI inputs)
AES-EBU input supports up to 8 pairs of stereo or 8 channels of balanced audio input (-10 dBV to +20 dBV/600 ohms)
Output Interface
- 3 Ethernet ports (100/1000 BaseT interfaces): 2 for data transmission, 1 management port (out-of-band)
- 3 ASI outputs (75 Ohm BNC interfaces).
Configuration and Management
SNMP (MIB v2c) with remote SNMP supervisor
Embedded web-server configuration
Front panel with LCD/keypad
Physical Appearance Parameters
19” 1-RU (482x44.5x508 mm/19”x1.75”x20”)
7.5 kg/16.5 lbs
Environmental Parameters
Cooling air flow from front to back
Option-REV: back to sides airflow
Operating temperature: 5 to 65 °C / +41 ° to +149 °F
Storage temperature -20 to 70 °C / +32° to +158 °F
Operating humidity 5 to 90% (non-condensing)
Input voltage range: 100-240 VAC, 50/60 Hz
Typical consumption 80 W
Certification
ROHS
CE and FCC Class B Certifications, ECM Compliance:
- EN 55022: 2006,
- EN 55024: 1998 / A1 : 2001 / A2 : 2003,
- FCC PART 15 Class B: 2006,
- EN 61000-3-2: 2000 / A2 : 2005,
- EN 61000-3-3: 1995 / A1 : 2001 / A2 : 2005,
Safety:
EN/UL/CA 60950-1