Contact the author of this article, Guo Zhen.guozhen@onebandsys.com；
The Harley bNSG 9000 IPQAM supports a maximum of 54 RF outputs. Configuration of the device is done via a web browser. Before configuring, it is necessary to confirm the device's management IP address, which will be displayed on the device's LCD screen. You can also query or change the device's IP address. Once the IP is set, you can manage it through a web browser.
1. Restore factory settings, load and save backup parameters:
As shown in the figure below, after entering the device URL in the IE address bar, log in using the username and password for configure. In the platform interface, the clear configuration button in the lower right corner is for restoring factory settings. After clicking it, the device will restore to factory settings and restart. The export configuration button is for saving the current parameters to a backup file. After clicking it, in the pop-up window, click export file, then click save, and choose the location and file name on your computer. The import configuration is for loading backup parameters. After clicking it, in the newly popped-up window, select the location of the backup file saved on your computer and submit.
2. Configuration of Network Management Port, GBE Input Port, and QAM Output Module
In the platform interface, clicking on the corresponding network interface allows you to configure parameters such as the IP address. As shown in the image below, clicking on Eth1 enables you to configure the IP for the Eth1 port. Since this is a management interface, this port can only be configured with a physical IP. The image below shows the configuration for the Gigabit data port GBE1. After checking the box in port enable, click on port configuration below the image to enter the configuration menu.
The detailed configuration interface for the GBE port is shown in the image below. Here, you need to select the type of active port as RJ45 (network port interface). If necessary, you can configure parameters such as the IP address under RJ45; however, since the received data is all multicast, configuring the IP address and other parameters is not mandatory.
For more detailed information, please send an email tosupport@onebandsys.com; or contact the Onebandxin Technical Department
Download Document